Loading... Please wait...
1-877-336-3626 FAX: 1-877-854-4244


Add to Wish List

Click the button below to add the M2 Bag Standard Load Out to your wish list.

Our Newsletter

M2 Bag Standard Load Out

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12

Product Description

The M2 Bag is the perfect accessory for any Warlord Game. It can fit 12 inches of foam to comfortably store and protect your models.  The bag comes with four patches to represent each of the Warlord Games: Black Powder, Bolt Action, Hail Caeser and Pike & Shotte. Its rugged black, kevlar exterior protects a hard plastic interior built for strength and durability.  This bag was designed for airport travel and meets all FAA regulations for carryon luggage. Note: Please check your airlines carryon guidelines before travel.

This load out option comes fully loaded with pre-designed Battle Foam size foam trays.  You will receive the following foam trays with your purchase:

  • 2x 1.5 inch (38 mm) thick tray with 48x 1 3/4 x 1 inch (45 x 25 mm) cut outs and 5x 2 inch (50 mm) circle cut outs.
  • 2x 2 inch (50 mm) thick tray with 4x 2 3/4 x 1 1/4 inch (70 x 32 mm) cut outs, 4x 3 x 1 3/4 inch (76 x 45 mm) cut outs, 7x 4 1/4 x 1 3/4 inch (108 x 45 mm) cut outs and 5x 2.5 inch (63 mm) circle cut outs.
  • 1x 3.5 inch (89 mm) thick tray with 10x 4 x 2.5 inch (100 x 63 mm) cut outs.  Pluck foam lines the middle section of the foam tray to allow for some customization for your vehicles.
  • 1x Foam Topper.

Tray Dimensions - 15.5W x 12L" (394W x 305L mm)

Outside Bag Dimensions - 18W x 14L x 14H" (457W x 356L x 356H mm)

Warning: This bag and foam design are intellectual property of Battle Foam® and it is protected by Copyright Laws. Unauthorized reproduction of this design is prohibited by Federal Law and is subject to criminal prosecution.

Write your own product review

Product Reviews

  1. Bolt Action US Army impressions

    Posted by Josh Clark on 19th Aug 2013

    I've encountered issues with both the light vehicle tray and tank trays. The largest slots in the light vehicle tray are just slightly too short to fit the M3, M16, and duece'n'half but pre-cut probably could have been extended more to the outside of the tray to accommodate them. I'll end up taking a utility knife to these slots to correct the issue. With the tank tray I've taken issue with the pluck and pull arrangement as the M4A3 ended up being too long for the pre-cut slots and the pluck and pull isn't lined up with the existing walls so you either need to lay your tanks sideways to fit or you'll need to cut the pluck and pull into smaller sections to fit the tanks. Only the Stewart and Chaffee fit upright and there was no hope for the Pershing. I would recommend avoiding the tank tray all together and go for a custom tray to fit your chosen army's armor. The other trays are great and the bag quality is what you expect from Battle Foam so that's great.