The Battle Foam Black Label Cases are made from ultra high-strength polypropylene copolymer resin. They feature a gasketed, water and dust tight, submersible design. They also feature a latch system, comfortable, ergonomic snap-down rubber over-molded grip handle and automatic pressure equalization valve. They are resistant to UV, solvents, fungus, corrosion and impact damage.
This case can fit 24 inches of Tripoli/Nimitz Black Label size foam trays or 48 inches of Tripoli/Nimitz Black Label half size foam trays. This Custom Load Out option allows you to build your own Load Out for this bag. It can be filled with:
- Our Pre-Designed Selection of Tripoli/Nimitz Black Label Trays (20W x 13.75L) or Tripoli/Nimitz Black Label Half Trays (13.75W x 10L)
- Custom Designed Trays (Click Here for the Custom Tray Creator)
- Traced Models for a Unique Design (Click Here for tracing instructions)
- All of the above!
When you are selecting trays to fill your bag, please add a 1/4 inch (6 mm) to every tray's thickness to allow space for the bottoms.
-Our library of pre-designed trays are categorized by army for easy searching. We recommend browsing through these before you decide to design your own trays.
-If you choose to design your trays, our Custom Tray Creator is a great tool that allows you to design every inch of foam to fit your army's specific needs. By using the custom tray creator, you ensure your load out will turn out exactly as you want. You will want to select the "Tripoli/Nimitz" tray size for this bag. Custom text is available on the trays where available.
-You may also provide traces that the designers will use to build your load out. All traces require a ruler on the side of the page for scaling purposes (a printable .pdf can be found here). Please keep in mind that this type of order will be left completely up to the discretion of the designer. By using this method, you understand that some variations in the design may occur. Unless the custom tray creator is used to design your trays, overall finish will be solely left up to our staff. Blueprints can be emailed upon request.
Once you have determined your load out, you can provide a list of pre-designed trays and/or attach your custom designs and then click "Add to Cart". Your list and designs will be submitted with your online order. You may also email your tray designs and/or traces to firstname.lastname@example.org, or fax this information to 877-854-4244. Please reference your name and order number.
If at any time you require assistance in how to build your custom trays, please contact us via chat, email, or call us at 877-336-3626.
Tray Dimensions - 20W x 13.75L" (508W x 349L mm) or 13.75W x 10L" (349W x 254L mm)
Inside Case Dimensions - 27.75W x 20L x 12H" (705W x 508L x 305H mm)
Please allow 3-4 weeks for design and production of custom foam.
(P.A.C.K. C4 pictured is for size comparison only and must be purchased separately.)
Available through US Warehouse only.
Warning: This bag and foam design are intellectual property of Battle Foam® and it is protected by Copyright Laws. Unauthorized reproduction of this design is prohibited by Federal Law and is subject to criminal prosecution.