The Seawolf Black Label Case Standard Load Out

The Battle Foam Black Label Cases are made from ultra high-strength polypropylene copolymer resin.  They feature a gasketed, water and dust tight, submersible design.  They also feature a latch system, comfortable, ergonomic snap-down rubber over-molded grip handle and automatic pressure equalization valve.  They are resistant to UV, solvents, fungus, corrosion and impact damage.

This case can fit 6 inches of Seawolf Black Label size foam trays.  With this load out option, you will receive the following foam trays:  

• 1x Seawolf Troop Foam Tray - 2.5 inch (63 mm) thick tray with 18x 1 x 1 inch (25 x 25 mm) cut outs, 9x 1 1/2 x 1 1/2 inch (38 x 38 mm) cut outs, 4x 2 1/2 x 1 inch (63 x 25 mm) cut outs, 1x 2 1/4 x 1 1/4 inch (57 x 32 mm) cut out, 1x 3 1/4 x 2 1/4 inch (83 x 57 mm) cut out and 1x 3 x 2 1/4 inch (76 x 57 mm) cut out.
• 1x Seawolf 2.5 inch (63 mm) thick Pluck Foam Tray.  The pluck foam pieces are 3/4 inch (19 mm) squares.  At times, pluck foam trays may require an exacto blade to cut through portions of the foam.
• 1x Seawolf Foam Topper 

Custom text is not available on this product. 

Tray Dimensions - 14.75W x 10.25L" (375W x 260L mm)

Inside Case Dimensions - 14.75W x 10.25L x 6H" (375W x 260L x 152H mm)

(P.A.C.K. C4 pictured is for size comparison only and must be purchased separately.)

Warning: This foam design is intellectual property of Battle Foam and it is protected by Copyright Laws. Unauthorized reproduction of this design is prohibited by Federal Law and is subject to criminal prosecution.

DID YOU KNOW YOU COULD SAVE AN ADDITIONAL 5% OFF THIS PURCHASE BY BECOMING A BATTLE FOAM VIP?  CLICK HERE TO SIGN UP TODAY AND SAVE ON ALL FUTURE PURCHASES.