Small Medium and Large Model Troop Foam Tray (BFS-2)
This tray was made to hold a variety of different sized models.
Custom text is not available on this product.
2 inch (51 mm) thick tray with 12x 2 1/4 x 1 1/2 inch (58 x 38 mm) cut outs and 4x 2 1/2 x 2 inch (64 x 51 mm) cut outs.
Tray Dimensions - 11.5W x 7.75L x 2.25H" (292W x 197L x 58H mm)
Trays are designed to fit side by side in the P.A.C.K. System Bags.
(Bags, models and extra foam trays are not included with this purchase. You will only receive one tray when ordering this foam tray.)
DID YOU KNOW YOU COULD SAVE AN ADDITIONAL 5% OFF THIS PURCHASE BY BECOMING A BATTLE FOAM VIP? CLICK HERE TO SIGN UP TODAY AND SAVE ON ALL FUTURE PURCHASES.
Warning: This foam design is intellectual property of Battle Foam® and it is protected by Copyright Laws. Unauthorized reproduction of this design is prohibited by Federal Law and is subject to criminal prosecution.
In the description, the tray cut out height says it is either 1.5" but overall height is 2.25". So, either the one of the heights are described wrong, or the tray has a 3/4" bottom padding? Can someone confirm the actual height of this tray? 1.5 inch (38 mm) thick tray with 12x 2 1/4 x 1 1/2 inch (58 x 38 mm) cut outs and 4x 2 1/2 x 2 inch (64 x 51 mm) cut outs. Tray Dimensions - 11.5W x 7.75L x 2.25H" (292W x 197L x 58H mm) Battle Foam Says: Thank you so much for catching that. The 1.5 was a type, but if you see in the tray name (BFS-2) That means 2 inches. Also the last line you mentioned the 2.25" height which is correct. We have edited the description and apologize for the confusion. Please reach out to firstname.lastname@example.org and we can help get you sorted!