Magna Rack Spacer Leg Set
The Magna Rack was designed for those gamers who like to store and transport their miniatures magnetized upright and free from other materials. Magna Racks can be assembled in many different ways using these Magna Rack Spacer Legs.
4x Bottom Plugs and 4x Top Caps or Plugs are required for each Magna Racks kit assembly. 2 inch Short Legs with Top Caps create a flush top tray when assembled. Any sized spacer leg (excluding 2 inch short spacer legs) with the Top Plug create a 1/2 inch space on the top tray.
With this set, you will receive four spacer legs which allow you to adjust the height between your Magna Rack Trays.
Sizes available include 2, 2 short, 2.5, 3, 4, 5, 6, 8, 10, and 12 inch spacer legs.
These spacer legs work with all Magna Rack Trays.
If you require more space in between trays, two Magna Rack legs can be combined together. For example, to create a 7 inch spacer leg connect, one 4 inch and one 3 inch leg together. Please note that once Magna Rack legs are connected in this way they will not come apart.
Magna Rack Trays and Plugs sold separately. Some assembly required. For Magna Rack Assembly Instructions, please click here.
DID YOU KNOW YOU COULD SAVE AN ADDITIONAL 5% OFF THIS PURCHASE BY BECOMING A BATTLE FOAM VIP? CLICK HERE TO SIGN UP TODAY AND SAVE ON ALL FUTURE PURCHASES.
Warning: This rack design is intellectual property of Battle Foam® and it is protected by Copyright Laws. Unauthorized reproduction of this design is prohibited by Federal Law and is subject to criminal prosecution.
There are several leg sizes and only the smallest set is actually made to be for a top rack, to make it flush. I got the 4" and 6" sets, so I think I may need to cut them down so the caps will be flush with the rack. I would like to see more top spacer lengths or a how-to to properly cut down a spacer.
Great system, that is modular to allow every army to be safely and efficiently stored of transported. Love the system
I recently purchased the new sliders. I had 4 inch legs and two 3 inch legs. Because the new sliders are thicker, I couldn't close my bag so I have to purchase another set of legs. I'd love a 3 1/2 leg as the 3 ince is a little too short for my TAG for infinity. Another thing is a drilled a hole for magnets to keep the drawers in. Worked well. Wish 6mm holes were pre drilled. But back to the legs, which are fine, but due to the increased thickness of the sliders the legs are not as secure, do not lift the top shelf and expect the bottom to come with it cause it won't (could with non-sliding shelves). Battle Foam Says: Hello John! Thank you for spending some time to write this. The Sliders are a little thicker, but most legs still work well with the current builds. We also know that due to the new Sliding feature that we see a lot less being pulled from their bags. Your magnet best practice is a great idea if you do not want them to slide out easily.